How to maintain aluminum alloy doors and windows

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

How to maintain aluminum alloy doors and windows

aluminum replacement windows online
window awning dimensions
outdoor sliding doors
what is a bifold window

Do you need to know about our expertise in improving the maintenance and management of aluminum alloy doors and windows? Good quality aluminum alloy doors and windows companies can use them more assuredly, and well-maintained aluminum alloy doors and windows can make students use them for a longer time. Today, I will introduce to you the magic formula for maintenance:

1. Push and pull naturally

When using aluminum alloy doors and windows, the movements should be handled gently, and the push and pull should be natural. If you find it is difficult, do not push hard. You should troubleshoot first..

2. Remove dust accumulation

Dirt and deformation of aluminum alloy doors and windows are the main reasons why it is difficult to pull its quality. Keep the door clean, especially the sliding groove. Usable fouling vacuum cleaner tank top and door seal. When cleaning aluminum alloy doors and windows, people do not step on the aluminum frame or pull the support of the frame.

3. Remove stagnant water

After use in rainy days, wipe dry the wet glass and aluminum alloy door and window frames in time. Pay special attention to the water accumulation in the chute to prevent water stains from accumulating large amounts of residue. If the chute is used for a long time, the friction force will increase. You can add a little impact oil or apply a layer of fire wax oil.

4. Cleaning method

Aluminum alloy door and window companies can use a soft cloth dampened with water or neutral and detergent. Do not use ordinary Chinese soap and detergent, and do not want to use detergents with strong acid and alkali such as decontamination powder and toilet detergent.

5. Repair and replacement

The joints of the aluminum alloy frame should be checked frequently, the bolts should be tightened in time, and the damaged parts should be replaced. The vulnerable parts of aluminum alloy doors and windows, such as positioning shaft pins, wind braces, and floor springs, should be checked frequently and lubricated regularly to keep them clean and flexible. The sealing top and the glass glue seal are the key structures to ensure the sealing and heat preservation of aluminum alloy doors and windows. If they fall off, they should be repaired and replaced in time.

6. Regular inspection

Frequent inspections and the joints between the aluminum alloy frame and the wall can easily cause the overall horizontal deformation of the frame structure if it becomes loose over time, making it impossible for aluminum alloy doors and windows companies to close and seal. Therefore, if the screws at our joints are loose, they should be tightened immediately. If the base of the screw is loose, apply a small amount of cement to seal with epoxy super glue.